Description Jang JJPDCRK Depth Control Ring Kit Jang JJPDCRK Depth Control Ring Kit is used with JP-1, JPH-U, JPH-2, JPH-3, JPH-4, JP-2, JP-3, JP-6, JP-6W Used on the post of the shoe to extend the planting depth These are a series of “pipes or rings” cut into two different lengths. When you remove the shoe from the seeder, these rings then slip over the stem of the shoe. The longer of the rings was designed to go on first, and this would bring your shoe to “ground level”. After that, the rings are 1/4″ thick and can help control the depth. Example: If you put the long ring on, and then 2 small rings, you should be close to 1/2″ deep. Click Here for JP-1 Parts Diagram: Check out our other Jang Parts: JP101 Jang Seeder Knob, Thumb Screw for the Handlebar JP132 Jang Seeder Cap Knob for Handlebar on JP-1 Jang Seeder JP53 Jang Seeder Brush for the Jang JP Series Seeder Hoppers JP56 Jang Seeder Knob, Thumb Screw for Chain Guard on JP Jang Seeders JP69 Jang Seeder Hopper Lever for JP Series Jang Seeders JPDSG Jang Double Seeding Guide Spout ~ Use with 24 Hole and 36 Hole Rollers JPSG Jang Seed Guide Spout for JP Series Jang Seeders Jang JJP49 Oiless Bushing Jang JJP57 Sprocket and Shaft for JP and JPH Garden Seeders Jang JJPC Standard Furrower Shoe for JP and JPH Seeders JJP65 Chain for JP Series Jang Seeders
